How to Change The Brake Pads in Your CarChanging your brake pads is a much cheaper option than taking it to a car shop,which can usually lead to an expensive fee for anyone. For the cost of materials,you'll be able to get your car stopping properly after following these steps. Part 1 of 3: Exposing the Brake Pads 1. Get the correct brake pads. Pads are available at any auto parts store or your local car dealership. Just let them know the year,make and model of your car and select a pad in your price range. In general,the more expensive they are,the longer they last.
Penetrating Catalyst to aid in removing them. * Check the caliper pressure. The
caliper of a car at rest should move back and forth a little bit Auto Code Scanner. If not,the caliper is
under pressure and it may fly off when you remove the bolts. Take extra
precaution when checking to keep your body to the side of its path,even if it is
loose. * Check to see if there are any shims or performance washers fitted
between the caliper mounting bolts and the mounting surface. If there are,remove
them and keep track of them to replace later. You will need to refit the caliper
without the brake pads and measure the distance from the mounting surface to the
brake pad to replace them appropriately. * Many Japanese vehicles use a
two-piece sliding caliper that only requires the removal of two forward-facing
slider bolts,with 12-14mm heads. You will not need to remove the entire caliper.
7. Carefully hang the caliper with a small piece of wire to the wheel well. The
caliper will still be connected to the brake line,so hang it up with a small
piece of wire hanger or other scrap metal,so that it won't hang and put pressure
on the flexible brake hose launch
x431 pro plus. Also check in reverse. These braking tests ensure there are no issues with your
brake-pad installation,gives you confidence when driving on main streets and
helps"seat"the brake pads into place. * Listen for problems. The new pads may
squeak a bit,but i you should hear a grinding,metal-on-metal sound,you probably
have the brake pads reversed (.,the inside surface is incorrectly facing out).
This should be corrected immediately.
Related Links